Starter
You + one team member · 2 logins£47a month
Or £467 a year
- The full InstaQuote product: quote to paid, VAT and CIS, and your books with bank matching
Quoting + job admin app for UK plasterers
You do the job. We do everything else. For plasterers.
Deposit taken. Job booked. Invoice sent. Late payer chased. VAT sorted.
Type it, say it or snap a photo.
Start 7 days free See the 6 things no other trade app does
7 days free · Full app from £47/mo · Cancel any time
See the priceThe whole job
The same job, before and after.
You shouldn't have to do any of this. After you send the quote, the only thing you do is tap Job done. The deposit, the booking, the invoice and the chasing are handled.
- The skim's done and dry. The quote for the next one gets written in the van.
- "Can you itemise it?" and you're splitting boards from labour on the back of a bag.
- Chasing the deposit so you can buy the plaster, then chasing the balance.
- Pricing per metre in your head, then losing the metres by the time you're home.
- CIS off the labour for the builder, 20% VAT for the homeowner, both worked out twice.
- 01Quoting
NowWalls measured, price worked out on the drive, typed up that night, no reply for a week.
With InstaQuoteQuote priced from your saved rates in seconds. Sent straight away. The customer accepts on their phone.
- 02Customer acceptance & deposit
NowDeposit asked for by text so you can get the materials in. Paid when they remember.
With InstaQuoteThe quote is accepted and the deposit is paid on the same screen, by card.
- 03Invoices & payment chasing
NowInvoice done at the weekend. "Can you send it again?" Paid a month late.
With InstaQuoteTap Job done and the invoice goes out. Late payers get reminders in your name that stop when they pay.
- 04VAT, CIS & totals
NowCIS and VAT added up at the kitchen table, then checked again in the morning.
With InstaQuoteVAT, CIS and job totals worked out on every quote and invoice, the HMRC way, with the figure shown.
Built on the tools, not in a boardroom
I'm Tom. Ten years in the trade, and every quote done sat in the van on the drive. If that's you, keep reading.
I started in the trade at 17. Ten years in, the work was fine. It was everything after the work.
Every night I'd pull up at home and sit in the van on the drive, because the quotes and the invoices and the chasing had to be done before I went in. Every night. And the better the quotes were, the more people rang, so it never got smaller. I was starting to hate a trade I'd loved since I was 17.
If you've ever sat outside your own house doing paperwork, you know.
I tried every system going. Every one made a quote, then left me in the van doing the rest.
So I came off the tools and spent 18 months building the thing that didn't exist. Every step I used to do on that drive, built in so it happens without you. The quote prices itself from your rates. The deposit books the job. The invoice goes when you tap Job done. The late payer gets chased. VAT and CIS worked out.
Two things we found in no other trade app we checked: the deposit on your quote books the job and the customer moves the date themselves, and your bank statement gets matched with the tax to put aside shown.
It's new. Price a real job on it, 7 days free. If it's not quicker than what you do now, bin it and tell me why.
What I want is simple: you out of the van and in the house, paid properly and on time, and back in love with the trade you picked.
Want your prices set up with you? Reply to the welcome email and I'll ring you.
- InstaQuote Ltd
- Co. No. 17224118
- Registered in England & Wales
- ICO ZC153382
- Payments on Stripe, we never see a card number
- Data never sold
- VAT, CIS & reverse charge the HMRC way
Price a real job on it, 7 days free.
Full app. Every plan. Choose your team size.
Everything you've seen on this page is included from Starter. £47 a month covers you and one team member. Choose a larger plan only when more people need access. Your team sees the work. You keep control of the business.
Your website for just £30 more a month (£67 on its own). Switch above to add it.
For InstaQuote members
Claim my offerFree MTD for Self Assessment for a year, with an ANNA business account
Open a free ANNA business account in about 10 minutes. Sole traders get MTD for Self Assessment free for the first year. Limited companies get Auto Accounting free for 4 months, then £29 a month, switch off any time.
InstaQuote may be paid by ANNA if you open an account through us. ANNA's terms apply.
Crew
Up to 3 people£57a month
Or £567 a year
- The same full product as Starter. Nothing held back
Team
Up to 5 people£87a month
Or £867 a year
- The same full product as Starter. Nothing held back
Firm
Up to 10 people£157a month
Or £1,567 a year
- The same full product as Starter. Nothing held back
More than 10 of you? Talk to us
7 days free. Cancel any time, no minimum term. InstaQuote never takes a fee on your card payments. Prices shown are what you pay. InstaQuote is not currently VAT registered, so no VAT is added.
Website on its own: £67 a month, for a trade who doesn't want the app. Built for you from a few questions, hosted by us, and changed when you ask from the Website screen. Want the app as well? Pick any plan with your website.
What are you paying now?
Pick what you're on and how many of you there are. Every price below is off their own website, on the date it says, on their lowest-priced plan.
You're on
There are
Tradify
£68
a month
InstaQuote
£47
a month
Starter: you + one team member (2 logins), on the full InstaQuote product.
One plan price for your team-size band, not a separate fee for every user: Starter covers 2 of you (you and one worker), Crew up to 3, Team up to 5, Firm up to 10. And ours keeps going after the quote: the deposit, the booking, the invoice and the chasing.
On Tradify, once a customer accepts your quote you still book the job in, and move the date yourself when they ask.
Tradify's prices from their own website, on their lowest-priced plan, checked 19 September 2026. Prices move, so check theirs before you decide. Prices shown are what you pay. InstaQuote is not currently VAT registered, so no VAT is added. The whole comparison, line by line
Free with your membershipAn ANNA business account
Plus MTD for Self Assessment free for a year, for sole traders
Start 7 days free
7 days free · Cancel any time
Why us, not the others
Six things no other trade app we checked does.
Every app we checked does quotes, invoices, the diary, VAT and CIS. So do we. These six are on top, and none of the ten says it does them.
The deposit books the job.
No more chasing a date. They pick it, they move it, you turn up.
Your bank statement, matched to your invoices.
Upload it and every payment is matched to the invoice it paid. No surprise tax bill: what to put aside is shown as the year goes.
Download everything, even after you cancel.
Your work is yours, not ours. Five of the ten say on their own sites that they lock you out or delete it.
One tap splits labour and materials.
No more working out the itemised version at the kitchen table. Your merchant's prices, your markup.
Your own certificates, with reminders.
Gas Safe, NICEIC, CSCS, insurance, the lot on file. You're told before one runs out, never after.
Ask ChatGPT or Claude what's on today.
Make a key in Settings, paste it into ChatGPT or Claude once, and ask "who owes me?". It can read your account and never change it.
Checked on their own websites, 18 to 26 September 2026, and ServiceM8 again on 3 October, and all ten again on 12 October 2026: Tradify, Powered Now, Fergus, ServiceM8, Jobber, Commusoft, YourTradebase, QuickPrice, VoxTrade and PriceUp. Where their site says nothing, we say "not found", never "they don't". See it app by app.
The only bit you do
How a quote for plasterers gets built.
A quoting app for plasterers that doesn't stop at the quote. Price the room from your own m² rates, then it takes the deposit, books the job in and gets you paid. Photo the room or type in what you are doing: walls, ceiling, overboard, a bit of bonding, with the sizes. It prices it per m² off your rates and flags anything it had to assume.
Type it, say it or photo it. Photo the room, or type or say the job. Walls, ceilings, artex, dot and dab and beads come back as separate priced lines.
You give the sizes, it does the sums. No tape, no measuring tool. A photo gives it the rough sizes and what is in the room, you type or say the real sizes, and it prices off your rates. Anything it assumed is marked for you to check.
Priced from your rates. Priced from your own m² rates. Plastering starts you at £18/m² on walls, £22/m² on ceilings and a £220 day rate, and you change every figure to yours in the setup.
Your price list, day one
Plastering: what a new account starts with
Real UK starting prices for plasterers, already in your list on the first day. Every one of them is yours to change, and your rates are what the quotes price from.
| Work | Starter price |
|---|---|
| Skim plaster to existing walls | £18/m² |
| Skim plaster to ceiling | £22/m² |
| Plasterboard & skim (dot & dab) | £38/m² |
| Skim over artex ceiling | £26/m² |
| Plasterer day rate | £220/day |
Starting points for 2025 and 2026, meant to be tuned to your patch. Change one in Settings and every future quote uses it.
See the full plastering price list, freeThe materials come with it
Each line brings its own materials, so a room of skim brings the bags of multi finish and the PVA with it. One take off, your markup, ready for the merchant.
You can put a names only list on the customer's copy so they can see what you are supplying, with your buying and your markup kept to yourself.
VAT and CIS for plasterers. Work for a builder, a contractor or a developer and the CIS deduction is worked out on the quote and the invoice. The reverse charge is a separate tick, and it only applies if you're both VAT registered, the work is standard or reduced rated, and they haven't told you in writing they're the end user. Our free checker settles it. Work straight for a homeowner and both stay off.
Work out a CIS deduction, freeCheck the reverse charge, freeMaking Tax Digital for plasterers: do you need it?
Our word
No catches.
7 days genuinely free.
Your 7 free days start when you do. At the end of the free week you pick a plan, or the account pauses with nothing deleted. No InstaQuote charge during the trial.
No sales call to see the price.
Every plan is published on this page, in pounds.
No minimum term. Cancel when you want.
Cancel from Settings in a couple of taps. No notice period, no phone call, no form.
Take your data with you.
Export your customers, quotes, invoices, photos and receipts in one file, on any plan, even after you've cancelled.
No InstaQuote fee on your card payments.
Take a deposit or an invoice by card and InstaQuote adds nothing. Stripe's own card rate still applies, the same as anywhere.
Not quicker than what you do now? Cancel.
Price a real job on it in your free week. If it isn't quicker, cancel in a couple of taps and tell us why, so we fix it.
Asked by plasterers.
7 answers · No small print
The money questions (the trial, the cost, cancelling) are at the bottom of this list, and the how-to guides are in Answers.
Does a photo do the measuring for me?
No tape, no measuring tool. A photo gives it the rough sizes and what is in the room, you type or say the real sizes, and it prices off your rates. Anything it assumed is marked for you to check.
How does it price my skim?
Off your own m² rates, with a standard, premium and luxury band you set yourself. Plastering is seeded at £18/m² for walls and £22/m² for ceilings so you are accurate on day one, then you tune it to your patch.
Most of my work is for builders. Does it do CIS and the reverse charge?
Work for a builder, a contractor or a developer and the CIS deduction is worked out on the quote and the invoice. The reverse charge is a separate tick, and it only applies if you're both VAT registered, the work is standard or reduced rated, and they haven't told you in writing they're the end user. Our free checker settles it. Work straight for a homeowner and both stay off.
How many bags will it tell me to get?
It works the materials off the m² you are covering: bags of multi finish, PVA, beads and board for a dot and dab. It is a starting take off from real coverage rates, not a guess, and you can change any quantity before you send it to the merchant.
Do I need a card to start?
Not to try it. Your free week and your demo quote don't need one. If you pick a plan during the week, you add your card then and nothing is taken that day: the first payment goes out automatically when your free week ends (or up to two days later if you pick it in the last two days). Don't pick a plan and nothing is ever charged; the account pauses with nothing deleted.
What does it cost after the trial?
From £47/mo on Starter, for you and one more. Crew is £57/mo for up to 3 logins, Team £87/mo for up to 5 and Firm £157/mo for up to 10, and InstaQuote takes no fee on card payments (Stripe's standard card rate still applies). Your price stays the same for as long as your plan stays active.
Can I cancel whenever I want?
Yes, anytime, from Settings in a couple of taps. No minimum term, no lock-in, no phone call to escape. You keep access to the end of whatever you've already paid for, and that's that.
Not ready yet? Take the plasterers starter price list.
Your trade's starter price list, free. No spam.
Every common job in your trade, its unit and a realistic starting price, on one page you can print or keep on your phone. They are starting points to adjust, not a rate card.
Get your
Sunday nights back.
Price a real job on it. Build the quote from your rates, send it, and watch the deposit, the booking and the chaser run themselves. If it isn't quicker than what you do now, cancel in a couple of taps and tell us why.
Free with your membershipAn ANNA business account
Plus MTD for Self Assessment free for a year, for sole traders
Start 7 days free
£0 to InstaQuote during the trial. Then from £47/month only if you choose to continue.